DIY powerbank with voltage regulator and voltmeter
After building a simple powerbank, I now decided to combine a step-up module XL6009 with my existing powerbank. Fortunately, I had already constructed and tried …
Tag: CAD design
Glare free lamp and powerbank
I bought a new 3D printer with a closed build chamber. At some point I noticed that one of the two extruders was clogged. The …
3D printed tap wrench for tap M5 to M12
Wrench taps can be found in any well-stocked hobby workshop. Most are adjustable and made of steel or die-cast zinc. Unfortunately, these wrench taps are …
3D printed Dupont connector for jumper cable
Many DIY projects are accompanied by chaos at the workbench. Screwdrivers, soldering irons, jumper cables, everything lies all over the place. Clean up is usually …
Printed connector as soldering aid for jumper cables and LED strips
For one project, I spent a lot of time preparing cables (cutting, stripping, twisting, and applying solder to the strands). For prototypes, on the other …
Handcrafted / Hardware / Linux / Software
Upgrade: Data transfer via VLC and LiFi – Pi to Pi transfer
After I already transferred simple text messages via light signals from a Raspberry Pi to an Arduino Uno ( Link: https://nerd-corner.com/sending-text-messages-with-visible-light-communication/ ), I wanted to …
2 adjustable axis – CAD Design
I was looking for a stand to hold an optical mouse board for measuring the path of a wheel. Unfortunately I did not find a …
7 Inch Touchscreen Design Case
This is a 7 inch touchscreen Design Case. The monitor housing is multifunctional and offers 6 positions. For mounting on walls or devices a VESA75 …
Round Edge Cookie Cutter – Construction and 3D print
Ring is ring? One could think so. But it is not that simple. A simple ring didn’t solve my problems. I needed a cookie cutter …