DIY powerbank with voltage regulator and voltmeter
After building a simple powerbank, I now decided to combine a step-up module XL6009 with my existing powerbank. Fortunately, I had already constructed and tried …
Tag: housing
Glare free lamp and powerbank
I bought a new 3D printer with a closed build chamber. At some point I noticed that one of the two extruders was clogged. The …
3D printed Dupont connector for jumper cable
Many DIY projects are accompanied by chaos at the workbench. Screwdrivers, soldering irons, jumper cables, everything lies all over the place. Clean up is usually …
Printed connector as soldering aid for jumper cables and LED strips
For one project, I spent a lot of time preparing cables (cutting, stripping, twisting, and applying solder to the strands). For prototypes, on the other …
Improved LM2587S voltage converter (Step-Up Modul DC-DC)
I found some more possibilities to use the LM2587S voltage converter (step-up DC-DC module) after the development of the first case. The module is extremely …
Step-down Modul DC-DC LM2596S
I have recently constructed a housing for a step-up and had good experiences with it. However, since I also need the other direction, which is …