DIY solar panel mount for 2W panels
Often you don’t need a large power source to reliably charge an 18650 battery. Unfortunately, suitable, small solar panels are difficult to find – many …
Tag: SolidWorks
DIY keypad lock – 3D printing and code
A cupboard that should always be locked and five people who need to access it – a classic challenge. The obvious solutions? Five keys in …
Dupont Connector V1.1
In response to the extremely positive feedback on my quick connectors (Dupont connectors), I realized that their original purpose of only being used in the …
Click and clamp system – SMD5050 bracket
Who has ever had trouble with the adhesive on an LED strip? Nobody? Well, in my opinion, you have. Here comes the remedy! I call …
Glare free lamp and powerbank
I bought a new 3D printer with a closed build chamber. At some point I noticed that one of the two extruders was clogged. The …
3D printed tap wrench for tap M5 to M12
Wrench taps can be found in any well-stocked hobby workshop. Most are adjustable and made of steel or die-cast zinc. Unfortunately, these wrench taps are …
3D printed Dupont connector for jumper cable
Many DIY projects are accompanied by chaos at the workbench. Screwdrivers, soldering irons, jumper cables, everything lies all over the place. Clean up is usually …
Printed connector as soldering aid for jumper cables and LED strips
For one project, I spent a lot of time preparing cables (cutting, stripping, twisting, and applying solder to the strands). For prototypes, on the other …
2 adjustable axis – CAD Design
I was looking for a stand to hold an optical mouse board for measuring the path of a wheel. Unfortunately I did not find a …
7 Inch Touchscreen Design Case
This is a 7 inch touchscreen Design Case. The monitor housing is multifunctional and offers 6 positions. For mounting on walls or devices a VESA75 …